Your Cart:
The cart is empty... Start Shopping!

Actuator Breaker

THE BREAKER

Designed for those Mechanical Engineers and Test Lab Technicians that need to know, "What Extreme conditions must exist" such as (Max input Voltage and Current) to be able to break either the HVAC module door drive shaft or the actuators internal gears.

$320.00 (each) 2 items in stock Purchase
Learn more
This tool is used for quality development testing and should be used for that endeavor only.

Features & Specs

The Breaker: BKR
$320.00 (each) 2 items in stock Purchase
Learn more

  • Operating Voltage Range: 8 – 30 Vdc
    (Anything out of range and the Breaker will shut-down to protect itself and the HVAC system.)

  • Short circuit, Reverse/Polarity and Over Temp protected
  • In the event out motor pins become shorted to ground, "Wolfs Eyes Glow Red”, Removing short or releasing red drive buttons restores normal operation.
  • Internal Volt Meter for reading feedback voltage, Set screw on back for Meter Calibration.
  • Auto resets when input power is removed or Drive Buttons are released.
  • Additional cable adapters included along with carrying case.
  • 1 Year Warranty against internal component defects
  • External Port & Detachable DVM cable for reading feedback voltage for external instrumentation options.
  • Soft Touch Buttons (Power, Forward & Reverse)
  • Power Indicator
  • Automatic over current trips @ 2.0 Amps after 15 seconds

Caution!:

  • This Driver is recommended “ONLY” for Actuator and HVAC module door brake testing.
  • This driver exceeds normal automotive voltage and current capabilities.
  • User Discretion is Advised! Taskem-Tools holds no responsibility for the Damage it can cause.

What is the

Actuator Breaker

and Why Do I Need One?

Created for the Mechanical Design Engineers or Technicians that need to perform...

EXTREME BREAK TESTING

Automotive HVAC Modules have conditions that cause breakage and the Actuator Breaker was designed for just this purpose in mind. Created to help the designer test for maximum conditions that cause this issue to occur.

Extreme caution should be used

This in not like our other drivers, it’s a “BEAST”! and this beast only cares about protecting itself.

See Features & Specs...

Special Notation: The input power required to drive this tool must come from customer owned variable bench top VDC power supply.
Suggested Power Supply Ratings: 0 to 30VDC+ @ 0 to 3Amp max

Get Your Hands on an Actuator Breaker...
$320.00 (each) 2 items in stock Purchase
Learn more

Unique Portable Quality

Mode Door Actuator

Mode Door Actuator

  • FB2 Development Kit: Designed for test lab technicians who need to always know where the door is positioned for temperature and airflow testing.
  • BTR Actuator: Bi-Directional & Tri-State - Only designed to be used by Automotive Service Professionals, Nation wide, that require the ability to drive 90% of all HVAC Module actuators.
  • Mini-Driver: if you only want to move an actuator back and forth, then this is all you need
  • Mini-Driver with Feedback: for performing diagnostics when driving a motor.
  • Mini-D Adapters: if you want more speed out of an actuator door, you’ve got to give it more than 9-volts.
Foot Door Actuator

Foot Door Actuator

  • FB2 Development Kit: Designed for test lab technicians who need to always know where the door is positioned for temperature and airflow testing.
  • BTR Actuator: Bi-Directional & Tri-State - Only designed to be used by Automotive Service Professionals, Nation wide, that require the ability to drive 90% of all HVAC Module actuators.
  • Mini-Driver: if you only want to move an actuator back and forth, then this is all you need
  • Mini-Driver with Feedback: for performing diagnostics when driving a motor.
  • Mini-D Adapters: if you want more speed out of an actuator door, you’ve got to give it more than 9-volts.
Blend Door Actuator Driver

Temp/Blend Door Left Actuator

  • FB2 Development Kit: Designed for test lab technicians who need to always know where the door is positioned for temperature and airflow testing.
  • BTR Actuator: Bi-Directional & Tri-State - Only designed to be used by Automotive Service Professionals, Nation wide, that require the ability to drive 90% of all HVAC Module actuators.
  • Mini-Driver: if you only want to move an actuator back and forth, then this is all you need
  • Mini-Driver with Feedback: for performing diagnostics when driving a motor.
  • Mini-D Adapters: if you want more speed out of an actuator door, you’ve got to give it more than 9-volts.
Recirc Door Actuator

Recirc Door Actuator

  • FB2 Development Kit: Designed for test lab technicians who need to always know where the door is positioned for temperature and airflow testing.
  • BTR Actuator: Bi-Directional & Tri-State - Only designed to be used by Automotive Service Professionals, Nation wide, that require the ability to drive 90% of all HVAC Module actuators.
  • Mini-Driver: if you only want to move an actuator back and forth, then this is all you need
  • Mini-Driver with Feedback: for performing diagnostics when driving a motor.
  • Mini-D Adapters: if you want more speed out of an actuator door, you’ve got to give it more than 9-volts.
Temp Door Actuator

Temp Door Right Actuator

  • FB2 Development Kit: Designed for test lab technicians who need to always know where the door is positioned for temperature and airflow testing.
  • BTR Actuator: Bi-Directional & Tri-State - Only designed to be used by Automotive Service Professionals, Nation wide, that require the ability to drive 90% of all HVAC Module actuators.
  • Mini-Driver: if you only want to move an actuator back and forth, then this is all you need
  • Mini-Driver with Feedback: for performing diagnostics when driving a motor.
  • Mini-D Adapters: if you want more speed out of an actuator door, you’ve got to give it more than 9-volts.
  • Mode Door Actuator

    Mode Door Actuator

    • FB2 Development Kit: Designed for test lab technicians who need to always know where the door is positioned for temperature and airflow testing.
    • BTR Actuator: Bi-Directional & Tri-State - Only designed to be used by Automotive Service Professionals, Nation wide, that require the ability to drive 90% of all HVAC Module actuators.
    • Mini-Driver: if you only want to move an actuator back and forth, then this is all you need
    • Mini-Driver with Feedback: for performing diagnostics when driving a motor.
    • Mini-D Adapters: if you want more speed out of an actuator door, you’ve got to give it more than 9-volts.
  • Foot Door Actuator

    Foot Door Actuator

    • FB2 Development Kit: Designed for test lab technicians who need to always know where the door is positioned for temperature and airflow testing.
    • BTR Actuator: Bi-Directional & Tri-State - Only designed to be used by Automotive Service Professionals, Nation wide, that require the ability to drive 90% of all HVAC Module actuators.
    • Mini-Driver: if you only want to move an actuator back and forth, then this is all you need
    • Mini-Driver with Feedback: for performing diagnostics when driving a motor.
    • Mini-D Adapters: if you want more speed out of an actuator door, you’ve got to give it more than 9-volts.
  • Blend Door Actuator Driver

    Temp/Blend Door Left Actuator

    • FB2 Development Kit: Designed for test lab technicians who need to always know where the door is positioned for temperature and airflow testing.
    • BTR Actuator: Bi-Directional & Tri-State - Only designed to be used by Automotive Service Professionals, Nation wide, that require the ability to drive 90% of all HVAC Module actuators.
    • Mini-Driver: if you only want to move an actuator back and forth, then this is all you need
    • Mini-Driver with Feedback: for performing diagnostics when driving a motor.
    • Mini-D Adapters: if you want more speed out of an actuator door, you’ve got to give it more than 9-volts.
  • Recirc Door Actuator

    Recirc Door Actuator

    • FB2 Development Kit: Designed for test lab technicians who need to always know where the door is positioned for temperature and airflow testing.
    • BTR Actuator: Bi-Directional & Tri-State - Only designed to be used by Automotive Service Professionals, Nation wide, that require the ability to drive 90% of all HVAC Module actuators.
    • Mini-Driver: if you only want to move an actuator back and forth, then this is all you need
    • Mini-Driver with Feedback: for performing diagnostics when driving a motor.
    • Mini-D Adapters: if you want more speed out of an actuator door, you’ve got to give it more than 9-volts.
  • Temp Door Actuator

    Temp Door Right Actuator

    • FB2 Development Kit: Designed for test lab technicians who need to always know where the door is positioned for temperature and airflow testing.
    • BTR Actuator: Bi-Directional & Tri-State - Only designed to be used by Automotive Service Professionals, Nation wide, that require the ability to drive 90% of all HVAC Module actuators.
    • Mini-Driver: if you only want to move an actuator back and forth, then this is all you need
    • Mini-Driver with Feedback: for performing diagnostics when driving a motor.
    • Mini-D Adapters: if you want more speed out of an actuator door, you’ve got to give it more than 9-volts.
Made In USA
  • An electronic motor driver that drives a single coil DC motor CW & CCW.
  • Fits in the palm of your hand, and is light weight.
  • Input Is reverse bias protected?
  • Is Over/Under voltage protected if 9V connector is attached to Voltage greater or less than 9V Battery.
  • Is output short circuit protected.
  • Fits in your pocket to be taken anywhere.
 

What's in the Box?

NameAmountDescription
Actuator Breaker
1 x
Actuator Drive Harness
1 x
5 Way Detachable Actuator Drive Harness
Power Supply Cable
1 x
High Current DC Power Supply Cable
Carry Case
1 x
Additional cable adapters included along with carrying case
Adjustment Tool
1 x
Adjustment tool for Measurement Accuracy

Hardware/Unit Specifications:

  • Unit Size (inches): 4 (h) x 2.4 (w) x 0.7 (d)
  • Unit Weight (ounce): 2.19

NOTE: No actuator connectors will be provided because there are hundreds of different types. If you require assistance, send us your connector, terminals and pin out instructions and we will install it at no charge.

 
$320.00 (each) 2 items in stock Purchase
Back to Top
 
Copyright © 2019 Taskem-Tools. All Rights Reserved.
Site: D.P. Web Design
Your Cart
The cart is empty... Start Shopping!